MULTI-MILLION DOLLAR Online
MACHINERY AUCTION

Bidding Now Open
Closes Friday, February 17 at 4:00 PM EST (USA)

Click Here to See Video on 7.5 MW Generators

(Scroll to bottom for partial photo gallery or go to biddspotter for entire catalog with pictures)

Inspections:
A & B – 132 54th St. & 140 53rd St., Brooklyn, NY 11220 & 11232 – Parking at 2 Ave. & 54th St. (Private Lot) Monday, January 30, to Saturday, February 4, 9:00 am – 5:00 pm • February 6 & 7, 10:00 am – 3:00 pm
C – 1260 Atlantic Ave., Brooklyn, NY 11216 Tuesday, Wednesday, & Thursday, January 31, & February 1 & 2, 10:00 am – 3:00 pm D – 780 S. Franklin St., Wilkes-Barre, PA 18701 – Thursday & Friday, February 2 & 3, 10:00 am – 3:00 pm
E – 2900 72nd St., St. Petersburg, FL 33710 – By Appointment
F – 510 Stewart Dr., North Syracuse, NY 13212 – By Appointment
G – 37-14 29th St., Long Island City, NY 11101 – By Appointment

[expand title=”CNC LATHES:“]

2007 MORI SEIKI SL-603B/2000 CNC LATHE, S/N 600GC0379, 800 Cutting Hours, MORI MSX-500111 CNC Control, Chuck Size, 39.13” Swing Over Bed, 28.85” Swing Over Cross Slide, 90.05” Distance Between Centers (CC), Max Machining Length 78.7”, Spdl. Bore 7.3”, 10 Position Turret, Spdl. Spd. 1500 RPM, Travels – X-19.1”, Z-84.6”, Spdl. Nose A2-15, TSUBAKIMOTO MAYFRAN CT-20 Chip Conveyor, Chip Blaster Coolant System (G) New LANSING AB-11-15-G CNC Gap Lathe, S/N NA, MITSUBISHI Meldes CNC Control, 43.3”/57” (in Gap) x 59”, 4.25” Spdl. Bore, Spdl. Spd. 8-1000 RPM, 8 Position Square Turret, Travels: X-22.6”, Z-59”, 50” Face Plate (A) New LANSING CK6280 CNC Gap Lathe, S/N 97117, FAGOR 8050TC CNC Control, 34”/44” x 120”, 4.2” Spdl. Bore,, 12” 3-Jaw Chuck, 38” Face Plate, (A) New LANSING G NV-30 CNC Chucker, S/N 24378, GE MC1050 CNC Control 30” x 24”, 9¼” Spdl. Bore, 6 Position U/L Turrets, (2) 25” Front & Rear Hydraulic Chucks (A) New LANSING G Pathmatic P-24 CNC Chucker, S/N 4982, FAGOR 8040 CNC Control, 46” (accepts raising blocks to increase swing), 6-5/16” Spdl. Bore, Spdl. Spd. 0-800 RPM, 12 Position BARUFALDI Hyd. Turret, 38” Face Plate (A) LANSING AB-8-10 CNC Chucker, S/N NA, 31.5” x 39.4”, A2-11 Spdl. Nose, 4.1” Spdl. Bore, Spdl. Spd. 8-1000 RPM, 8 Position Turret, Travels: X-20.7”, Z-39.4” (A) LANSING G Pathmatic P-24 Chucker, S/N 6778, ALLEN BRADLEY 7100 CNC Control, 24” x 40”, 4¼” Spdl. Bore, Spdl. Spd. 6-1500 RPM, Travels: X-12½”, Z-40”, 8 Position Turret Chip Conveyor, 14” Chuck, Hyd. Tail Stock (A) LANSING G Pathmatic NC 21 Chucker, S/N NA, GE Mark Century 550 Control, 22” x 60”, 4-1/8” Spdl. Bore, Spdl. Spd. D-2000 RPM, 12 Position Turret (A) LANSING G P5-20 CNC Lathe Chucker, S/N NA, GE MC 1050 CNC Control, Tailstock, 4-1/8” Spdl. Dia., SS 40-200 RPM, 6 Station Upper Turret, 8 Station Lower Turret (A) ENCO (COGIS) BFE65 Mini Mill/Lathe, S/N 010/82 (A)[/expand]

[expand title=”OIL COUNTRY LATHES:“]

New LANSING ‘G’ 52” X 120” Semi-Automatic Box Cycle Threading Oil Gap Bed Country Lathe, S/N 181181, 25” Spdl. Bore, Front & Rear Chucks, Extended Taper Attmt., 52”/67” x 120”, Inch/Metric Threading, A1-35 Spdl. Nose, Spdl. Spd. 0-177 RPM, 60 HP, Steady Rest (A) WIRTH Automatic Oil Country Threading Lathe, Mdl. ARD310, 12” Spdl. Bore, 2 Lead Screws, 30” Turning Length, SS 5-500 RPM, Program Control (A)[/expand]

[expand title=”MANUAL LATHES:“]

(2) New LANSING ‘R’ Gap Bed Heavy Duty Lathe, S/N 8035308 & 8034945, 32”/41-3/4” x 120” CC, 4-1/8” Spdl. Bore, Inch/Metric Threading, SS 8-1250 RPM, D1-11 Spdl. Nose, Steady Rest, 39” 4-Jaw Chuck (A) New LANSING G24 Gap Bed Lathe, S/N 11277, 24”/33½” x 160”, 4⅛” Spdl. Bore, D1.8 Spdl. Nose, SS 20-1000 RPM, Inch/Metric Threading, 19” 4-Jaw Chuck (A) New LANSING Gap Bed Engine Lathe, S/N 7934747, 34”/48” x 120”, 4⅛” Spdl. Bore, SS 8-1250 RPM, Inch/Metric Threading, 19½” 4-Jaw Chuck (A) New LANSING G20 Gap Bed Engine Lathe, S/N 24574, 20”/28½” x 120”, 4⅛” Spdl. Bore, D1-8 Spdl. Nose, SS 20-1500 RPM, Inch/Metric Threading, 18” 4-Jaw Chuck (A) New LANSING G24 Gap Bed Engine Lathe, S/N 81276, 24”/35” x 160”, 4½” Spdl. Bore, SS 13-1000 RPM, Inch/Metric Threading, 12” 3-Jaw Chuck (A) New LANSING ‘R’ Gap Bed Heavy Duty Hollow Spindle Lathe, S/N’s 80DLZ5P035, P042 & P041, 24”/36” x 64”, 4-1/16” Spdl. Bore, SS 40-1800 RPM, Inch/Metric Threading, 20” 4-Jaw Chuck (A) LANSING G24 Gap Bed Engine Lathe, S/N 17774, 24”/35” x 220”, 4¼” Spdl. Hole, SS 10-750 RPM, Taper Attmt., Inch/Metric Threading (A) LANSING 24 x 60 Heavy Duty Gap Bed Engine Lathe, 30”/42” x 60”, 4⅛” Spdl. Bore, SS 15-1180 RPM, Inch/Metric Threading, 20” 4-Jaw Chuck (A) TARNOW Gap Bed Engine Lathe, S/N 1418, 24”/34” x 120”, 2” Spdl. Bore, SS 56-1800 RPM, Inch/Metric Threading, 15” 4-Jaw Chuck (A)[/expand]

[expand title=”SPECIAL LATHES:“]

MAN-AU Cycle Single Point Threading Lathe, Mdl. MP-6, 24” x 48”, 6” Spdl. Bore, SS 30-920 RPM, (A) MX Profilomatic Auto Cycle Duplicating Lathe, Mdl. A, 17” x 30”, 2” Spdl. Bore, Multiple Tools, Used as Demo Model (A)[/expand]

[expand title=”TURRET LATHES:“]

WARNER & SWASEY No. 4 Square Head Turret Lathe, S/N 1553708, Lot 9, M-2240, 2-9/16” Spdl. Bore, 4-Position Turret (A) JONES & LAMSON No. 5 Turret Lathe, S/N 201999, 21¼” Swing, 3” Spdl. Bore, (A)[/expand]

[expand title=”VERTICAL TURRET LATHES & BORING MILL:“]

New LANSING 70” CNC Vertical Boring Mill, SIEMENS 810T CNC Control, 50” Table, 70” Max Turning Dia., 3.2 Tons Max Turning Wt., 47” Max Vertical Travel, 56” Max Ram Travel of Carriage, 40” Max Vertical Travel of Cross Rail, 12 Position ATC (Please Note: The photo is an actual of the machine. Due to consolidation, this machine is currently disassembled and will be sold in its disassembled state) (B) New LANSING 64” CNC Vertical Turret Lathe, SIEMENS SINUMERIK 810 CNC Control, 56” Table, 64” Max Turning Dia., 60” Max Ht. of Work Piece, 11,000 Lbs. Max Wt. of Work Piece, 2-Step Inf. Variable SS 5-160 RPM, 43” Hor. Travel of Rail Head, 40” Vertical Travel of Cross Rail, 5-Position Turret, Pendant Control, Servo Feeds (A) New LANSING VULCAN 63-40A Vertical Turret Lathe w/ PC Control, Pendant, 40” Table, 63” Max Turning Dia., 40” Max Ht. of Work Piece, 55” Turning Dia. w/Side Head, 5-Position Turret, 31.5” Vertical Head Travel, Side Head, 25” Horizontal Travel, 4 Tool Turret, Rapid Traverse, Hyd. Clamp (A) BULLARD Model 75 Cutmaster Vertical Turret Lathe, S/N 29702, 46” Chuck (no Jaws), 51” Ht. Under Rail, 58” Max Swing w/ Side Head, 5-Position Turret, Side Head, SS 5-187 RPM, 28” Cross Rail Travel Up/Down, 38” Vertical Travel of Turret Head (not in operation) (D)[/expand]

[expand title=”GEAR MACHINERY:“]

New LANSING GH32-SA Precision Gear Hobber, S/N 239, Max Workpiece Dia. w/ Tailstock Column 23.62”, without Tailstock Column 31.50”, Max D.P. 3, Max. Vertical Travel of Hob Slide 12.60”, Max Swivel of Hob Head ± 60º, 12-400 Teeth, 26” Worktable Dia., Dia. of Worktable Bore 3.15”, Distance Between Centers of Hob & Mandrel 2” – 19.68”, Max Dia. of Hob 6.3”, Max Length of Hob 5.708”, Max Axial Movement of Hob 1.574”, #5 MT of Hob Arbor, Hob Spdl. Spds. 40-200 RPM (A) New LANSING GH8 Automatic Cycle Gear Hobber, Max OD of Spur Gear 7.875”, Max Dia. Pitch 4 D.P., Max Travel of Hob Side 6.375”, Max Number of Teeth 12, Max OD of Hob 5½”, Hob Spdl. Taper #5, Dia. Of Hob Arbors 1½’, 2”, Max Helix Angle 45º, Work Table Dia. 11.875”, Dia. of Table Bore 2½”, Center Distance Hob Spdl. & Worktable 2.375” – 6.875”, Hob Spdl. Spd. 80-500 RPM (A) FRIMATIC TYPE 1 Gear Cutter (A) ILLINOIS #76 Hob Lead Measuring Machine, S/N 37, Max Dia. Of Hob 5” (A)[/expand]

[expand title=”CNC TURNING, HORIZONTAL & VERTICAL MACHINING CENTERS:“]

ACCUSTAR ST-200 CNC Lathe, (new 1994), 20” x 42”, FANUC O-T Control, 25 HP, Programmable Tailstock, Hydraulic Chuck (A) MITSUBISHI M-H50C CNC Horizontal Machining Center, S/N CH2082, MELDAS CNC Control, Travels: X-28.4”, Y-24.8”, Z-24.8”, Up to 4000 RPM, CAT 50 Taper, 40-Position Tool Changer, Pallet Changer, 20” x 20” Pallets (unit is disassembled) (A) HITACHI SEIKI VA-40 CNC Vertical Machining Center w/ 6 Pallet Changer, S/N VA4528, FANUC 6MB CNC Control, Travels: X-28”, Y-14½”, Z-13½”, SS 28-3150 RPM, NT-50 Taper, 25-Position ATC (A) MATSUURA MC-500V CNC Vertical Machining Center, S/N 81051951, YASNAC 30006 Control, Travels: X-23”, Y-13”, Z-18”, SS 30-6000 RPM, 16-Position ATC (A) BURGMASTER VTC-150 CNC Vertical Machining Center, S/N 214058, FANUC 6MB CNC Control, Travels: X-30”, Y-15”, Z-14”, 20-Position ATC, #40 Taper (A) SUPERCENTER 4 CNC Vertical Machining Center, FANUC 10M CNC Control, Travels: X-31.5”, Y-15.75”, Z-21.65”, SS 40-6000 RPM, 20-Position ATC, CAT 40 Taper, 47.25” x 17.72” Table (A) HITACHI SEIKI 4NE-600 CNC Turning Center, FANUC 5 CNC Control, 22-3/4” Swing, 2” Bar Cap., Travels: X-7.87”, Z-24.4”, 2-3/4” Spdl. Bore, 12-Position Turret, SS 20-3150 RPM (A) MIYANO ANC-45S CNC Turning Center, S/N NR450094, FANUC II TT CNC Control, Live Tooling, Sub-Spdl., C-Axis, Parts Catcher, Tool Setter, 1-3/4 Bar Cap., Travels: X-6-5/16 – 5½”, Z-17-29/32 – 7-7/8”, B-17-5/16”, 20 HP, SS 40-4000 RPM (Main & Sub Spdl.), 12-Position Upper Turret w/ 6 Live Tools, 6-Position Lower Turret, Chip Conveyor (A) LNS FMB Turbo 4000/1700 Hyd. Bar Feed w/ Auto Stacker (A)[/expand]

[expand title=”MILLS:“]

SUPERMILL AL-76 Horizontal Boring Mill, 3”, 26” Horizontal Travel, 40” Max Ht. Spdl. To Center of Table, 74” Distance Between Spdl. & Outboard Support, 7” Travel of Facing Side, SS 10-158 RPM, 37” Longitudinal Traverse w/ Outboard Support, 44” Auto Cross Travel, 36” x 48” Rotary Table, Outboard Support, Tooling, DRO (A) CINCINNATI #3 Plain Horizontal Mill, S/N 3J3P5D-23, 18” x 72” Table, SS 16-1600 RPM, #50 Taper, 15 HP (A)  CINCINNATI #5 Plain Horizontal Mill, S/N 4J5P5T-10, Mdl. 530-20, 20” x 94” Table, Travels: X-50”, Y-16”, Z-20”, SS 14-1400, #50 Taper Vertical Head Attmt. (A) VAN NORMAN 22L Universal Mill, S/N 22L-7253, 45” x 10” Table, Travels: X-28”, Y-10”, Z-17”, #50 Taper, SS 50-1400 RPM, 90º Vertical Head (A) VAN NORMAN 26L Plain Mill, S/N 36125, 58” x 13” Table, Travels: X-28”, Y-12”, Z-19”, SS 30-1500 RPM (D) K & T MILWAUKEE 205SA Horizontal Mill, S/N 9190-8, 12” x 50” Table, SS 25-1500 RPM, Travels: X-28”, Y-10”, Z-18”, Power Feeds (A) CINCINNATI No. 5HP Horizontal Mill w/ Vertical Head Attmt., S/N 8A5PIK-14, 72” x 21” Table, Travels: X-48”, Y-14”, Z-16”, #50 Taper, SS 16-443 RPM (D) EKSTROM CARLSON 540 Universal Routermill, S/N 540-111, 18” x 48” Table, 31” Throat, SS 160-5000 RPM (A) BRIDGEPORT ‘J’ Head Vertical Mill, S/N 60608, 9” x 42” PF Table, 1 HP, SS 80-2700 RPM (C) BRIDGEPORT Roundover Arm Vertical Mill, S/N 9712, 9” x 42” Table, ½” HP (C) MSC VS Vertical Mill, 10” X 50” PF Table, 2 HP, SS 70-3600 RPM, R8 & 40 Taper (A) ROCHAUD FH-108 Production Mills, S/N 52038 & 35, 5” x 14” Table, 1 HP (A) SUPERMILL EHD Vertical Mill, 9” x 42” PF Table, SS-80-2800 RPM, R8 Taper (A)[/expand]

[expand title=”ROTARY SUR FACE GRINDERS:“]

New LANSING 72 Rotary Surface Grinder, 72” Swing, 70” Dia. Of Workpiece, 72” Table, 40” 14 Segment Wheel, 100 HP, 20” Vertical Travel, 16” Ht. of Workpiece (A) New LANSING 56 Rotary Surface Grinder, 56” Swing, 47” dia. Of Workpiece, 16” Ht of Workpiece, 50” Table, 17.7” Vertical Travel, 50 HP, 25” 10 Segment Wheel (A) New LANSING 38 Rotary Surface Grinder, 38” Swing, 32” Dia. Of Workpiece, 14” Ht. of Workpiece, 32” Table, 16” Vertical Travel, 17” 8 Segment Wheel, 40 HP (A)[/expand]

[expand title=”UNIVERSAL CYLINDRICAL & PLAIN GRINDERS:“]

New ELGIN TITAN Hydraulic Universal Cylindrical Grinder, 14” x 60”, #4 MT, Steady Rests, Foot Stocks, (2) Internal Grinding Spdls., Wheel Dresser, (A) New LANSING 13A Hydraulic Cylindrical Universal Grinder, 13” x60”, Balancing Arbor & Stand, Internal Grinding Spdls., (A) New RIBON RUR – 1000 Universal Cylindrical[/expand]

[expand title=”CENTERLESS GRINDERS:“]

New LANSING M65-DI Precision Centerless Grinder, S/N 82278, Hydrodynamic Grinding Wheel Spdl., .008 – 1.125” Grinding Cap., Hydraulic Pump, 2½” x 12” x 5” Grinding Wheel, 2½” x 7” x 3” Regulating Wheel (A) CINCINNATI #4 Centerless Grinder, S/N 3M4HIY-10, Thru Feed Work Rest 2½” – 7½”, 24” x 12” Max Grinding Wheel, Wheel Truing Device, Hydraulic Pump, Wheel Truing Attmt. (A)[/expand]

[expand title=”SURFACE GRINDERS:“]

ELGIN ALPHA RTL700 High Speed Surface Grinders, S/N 32381 & 32380 & 27718, 20” x 28” Electro-Magnetic Chuck, 16” Wheel Dia., Hydraulic & Coolant Pumps (A) BLOHM HFS-12 Hydraulic Surface Grinder, S/N 77645, 12” x 48” Electro-Magnetic Chuck, 16” Grinding Wheel Dia. (A) BLOHM 12” x 28” Simplex Hydraulic Surface Grinder, S/N 0350, 12” Wheel Dia. (A) ELB SCHIFF 14” x 36” Hydraulic Surface Grinder, 12” Wheel Dia., Hyd. Table Feed (A) HITACHI GHL-300S9 Hydraulic Surface Grinder, S/N 715273-3, 12” x 36” Magnetic Chuck (A) COVEL Surface Grinder, S/N 10-1103, 6” x 18” Magnetic Chuck, 6” Wheel Dia. (A) DoALL D6-1 Hydraulic Surface Grinder, S/N GI-45294, 6” x 18” Permanent Magnetic Chuck (A)[/expand]

[expand title=”MISCELLANEOUS GRINDERS:“]

HEALD No. 70-A Internal Grinder, S/N 12101, RED HEAD Internal Spdl., 66” X 12” Table, 1¼” Hole Thru Spdl. (A) 35 HP Vertical Spdl. For Rotary Surface Grinder (Blanchard Type) (A) EXCELLLO & CARBALOY Dbl. End Tool Grinders, 14” Wheel Dia., 9” x 22” Table (A & D) KLING 10” DE GRINDER (D)[/expand]

[expand title=”PRESSES:“]

(2) New LANSING KDC-110 Gap Frame Presses, 110 Ton, 5⅝” Stroke, 50 SPM, 16” Shut Ht., 3⅝” Ram Adjmt., 19⅝” Daylight, 27¼” x 44” Bed, Air Clutch, Air Die Cushion, Lube System, Counter (A) CINCINNATI 300 Ton Hydroform Press, S/N 61-300-F-336-2, 8” Blank Dia., 7” Punch Dia., 7” Draw Depth, 12,000 Cycles/Hr., 8” Stroke, 11½” Daylight, 18” x 15” LRFB Bolster, Lot of Blanks (A) VULCAN CM 220 Eccentric OBI Press, S/N 270-666, 125 Ton, Air Clutch, 50 SPM Adj. Stroke 5⅞” – 8½”, Sgl. Back Gear, 13⅝” Shut Ht., 43½” x 27” Bolster LRFB (A) ERIE 100 Ton Hydraulic Press, S/N P1165, 48” x 60” Bed, 48” Stroke, 50” Daylight (B) BLISS Mdl. 25AN Horn Press, 25 Ton, Shut Height 8 – 20”, 12” – 20” FBLR Bed, Rolling Key Clutch (A) PRESS RITE #2 OBI Press, S/N 4273, 15 Ton, 90 SPM, 11½” x 18” FBLR Bed, 2” Stroke, 7” Shut Ht. (A) GENERAL MFG. No. 106 Power Press (A) KR WILSON MWMD-25-3 Hydraulic Straightening Press, S/N 2020, 25 Ton, 10” Stroke, 15” x 8” Table (A)[/expand]

[expand title=”DRILLS:“]

CINCINNATI BICKFORD Super Service Radial Arm Drill, S/N 6E378, 22” Column x 9’ Arm, 81” Max Drilling Radius 81”, 84” Head Travel on Arm, 72” Vertical Head Travel, #6 MT, SS 8-1000 RPM, 15’ Travel on Base, Hydraulic Clamping, Power Elevation (B) CARIMATI GT440/1000 Radial Arm Drill, S/N 87320, 9” Column x 40” Arm, 28” Head Travel on Arm, 26½” Head Travel on Column, 10” Spdl. Travel, #4 MT, SS 45-1600 RPM, 28” x 21” Table, T-Slotted Base (A) SPEEDMASTER Omniversal Portable Radial Arm Drill, Center of Spdl. to Column 35”, Spdl. Nose to Base Plate 34.5”, #3 MT, SS- 50-1000 RPM, 5.5” Spdl. Travel, Max Horizontal Travel of Head 22”, 360º Swivel of Drilling Head, Y- Travel of Arm 34.5” (A) (2) SPEEDMASTER (EDELSTAAL) DC 50 Heavy Duty Geared Head Column Drills, 25”, 2” Cap., Max Distance Spdl. To Table 29½”, Max Distance Spdl. to Base 47”, 21” x 17” Table, SS 47½ -2120 RPM (A) SPEEDMASTER (EDESTAAL) DC 63 Heavy Duty Geared Head Column Drill, 28”, 2½” Cap., 25” x 20” Table, SS 37½ -1700 RPM (A) DEFIANCE 3A HD Drill Press, SS 25-500 RPM, #5 MT, 24” x 24” Table (D) TOLEDO 4-Spdl. Drill Press, S/N 11898, 25”, 31” x 83” Table, #2 Taper, SS 617-3420 RPM (C) AVEY 2-Head Drill Press (D) DELTA 17” Pedestal Drill Press, S/N 36-6533 (A)[/expand]

[expand title=”SAWS:“]

New LANSING V-2812H HS Vertical Band Saw, 28”, 12” Work Ht., Hydraulic 26¾ x 29” Table, Blade Welder/Grinder, Blade Spd. 50-5200 FPM (A) MARVEL #8 Tilting Hd Vert. Band Saw, 18”, 45º Tilt (A) DoALL MP20 Vertical Band Saw, S/N 32-52559, 20”, 36” x 24” Table, Hydraulic Feed, Blade Spd. 25-5000 FPM, Inf. Var. Blade Welder/Grinder (A) RES Universal Mitering Band Saw, 7” x 8” Cap., Manual Vise, Capable of Miter Cuts (A) RACINE Mdl. 31 Hydrocut Hydraulic Hack Saw, 10” x 12”, 20’ Auto Feed Table (D) KELLER Hi-Duty Hack Saw (A) W.F. WELLS Double Column Auto Horizontal Band Saw, 9” x 18” (C) STONE 14” Cut-off Saw, Swivel Table, 7½ HP) (A) EVERETT 14 16 Cut Off Saw (D)[/expand]

[expand title=”JIG BORERS & BORING MACHINES:“]

SIP Mdl. 205 Jig Borer, Table 35” x 25”, SS 40-2000 RPM, SONY DRO, 36” Max Ht. Under Quill, Power DF on Quill, Coolant, Asst. Tooling (A) KEARNEY & TRECKER Autometric Jig Borer, S/N 23-4071, Mdl. B, SS 180-1800 RPM, 43” Max Swing (A) FRITZ WERNER Sgl. End Horizontal Deep Hole Drilling & Boring Machine, S/N 6073, 36” Stroke, 15” Center Ht. from Work Table, 13” x 29” Work Area, Spdl. Spd. 500-960 RPM (A) EXCELLO 1212A Boring & Turning Machine 6” Max Hole Cap., 12” Max Table Travel, Table 13¼” x 22” (A) New LANSING Horizontal Deep Hole Drilling & Boring Attmt, Drilling Cap. 4” (Sgl. Pass) / 7” (2 Pass), 32” Feed, Range of Feeds .020-1¾” / inch #5 MT (A)[/expand]

[expand title=”MISCELLANEOUS FABRICATION MACHINERY:“]

New LANSING IW-55A Ironworker, S/N 52524, Punching 55 Tons, 8⅝” Throat, 4” Cap., 1¾” Max Stroke, 1⅝” Dia. X 1⅜” Thickness, 3/4” x 3/4” Max Cap.; Flat Bar Shear – 14” x 7/16”, 14¼” Blade Length, 8” x 3/4”; Angle Shear at 90º4” x 4” x ½”; Bar Shear – Rd. 1¼”, Sq. Bar 1¼” x 1¼”, Channel 4” x 2”; Notching – 2” x 3½” x 3/8”, ‘V’ 2½” x 3/8”, Brake Tooling & Asst. Attmts. (A) WYSONG 1010 Power Squaring Shear, S/N P32-2004, w/ Computerized Back Gauge Control, 10’ x 3/16” (A) DRIES & KRUMP #165 Power Apron Brake, S/N 66396, 73” X 3/16” Cap., Geared (A) KAUFMAN Rolling Mill (A) STRIPPIT Fabricator, S/N 947 (A) NIAGARA No. 3 Hand Shear, 11” (A) ATLAS #4 Compound Mandrel Press, Ratchet Type (A) MARSHALLTOWN 10M Circle (Throatless) Shear, S/N 4723, 10 Ga., 9” Radius, 4” Circle Blade (A) GRANT No. 5A Hammer, S/N 5A88 (A) NIAGARA Manual Ironworker/Shear (C) DIACRO 24” Bar Folder, S/N L2155 (C) ALPHIL Spot Welder, S/N 3999, 40 KVA, 18” THROAT (A) MITUTOYO BHJ1020 CMM, S/N IKG217, RENISHAW PH 9 Probe (G) DELTA ROCKWELL 6” Vertical Belt Sander (A)[/expand]

[expand title=”TUBE FABRICATING MACHINERY:“]

(2) New LANSING (FSD) FHC315AV 3” Hydraulic Automatic Cold Saws, S/N 052 & 051, Clamping Vise, Up to 14” Blade Dia., 1.25” (32mm) Bore, Single Stroke Feed to 24” (5-610mm), Hydraulic Pump (A) New LANSING S2-6P Linear/Rotary Turret End Former, S/N 1327897, 6 Station, 2” Dia. Cap., Form, Flange, Flare, Expand, Reduce, Bead, Bulge, Taper, Thread, Chamfer, Branch & Saddle (A) New LANSING TP30 Thread & Rolling Profiler, S/N N103099, 1½” Dia. Pedestal Control, Three Die Design, Thru Feed (A) New LANSING RC-76 3” Rotary Blade Pipe Cutter, S/N F185, Hitch Feed, 3 Tool Rotary Cutting Head (A) New LANSING FHG-100SA Sgl. End Chamfering Machine, S/N 95SA025, Tube Dia. 1½” – 4”, 800-1600 RPM, Concurrently Chamfer I.D. & O.D. (A) (2) New LANSING A50 NC 2” Automatic Rotary Draw Benders, S/N’s 13675, 13674, Sgl. Axis, Mandrel & Booster, 1.5” Dia., Programmable, Hydraulic Pump (A) New LANSING A25NC 1” Rotary Draw Bender, S/N 5226, Mandrel, Booster, Programmable (A) LANSING CT45-31 Automatic (Tube & Bar Feeder) Bundle Loader, S/N 313603011, 20” – 125” Lengths, Up to 4” Dia. (A)[/expand]

[expand title=”FURNACES & OVENS:“]

(2) ABAR IBSEN Vacuum Annealing Furnace, Mdl. VFC., S/N 59226, 150 KW Output, 72” Door Opening, Working Area 41” x 63” x 36”, STOKES 615-MVR Pump, S/N 873410E1201, HONEYWELL Digital Control Programmer, Temp. Control & Recorder (A&C) GEHNRICH & GEHNRICH Gas Oven, S/N 1855, F/R Doors, 77” x 120” x 106”, Temp. to 550º (C) LYDON BROTHERS Electric Curing Oven, 36” x 32” x 32”, Temp. to 500º, Chart Recorder (A) ALPINE EF-3 Electric Heat Treating Oven, S/N 127, 2500º Temp., 18” x 18” x 19”, 440 V, 3 PH (C) THELCO 31479A Welding Rod Oven, S/N 1SA-D-8, 900 W, 230 V, 1 PH (D) (2) PHOENIX Mdl. 16 Dry Rod Ovens, 100º – 500º, 1000 W (D)[/expand]

[expand title=”PRINTING & PROCESSING:“]

SUPER JJ 2024 2/Color Offset Sheet Fed Printing Press, 28” x 40”, Dampening, 10,000 SPH, Sheet Cap. .04 -.8mm (.000157 x .0314”) Sheet  Thickness, Plate Size 31.50” x 40.55” (800 x 1030 x .3mm), Blanket Size 34.65” x 40.94” (880 x 1040 x 1.8mm), Pile Feed (A)[/expand]

[expand title=”TOOLING, ACCESSORIES, MACHINE ATTACHMENTS & INSPECTION:“]

Chucks to 60” ● Lg. Steady & Follow Rests ● Lathe Chucks, Face & Adapter Plates ● Taper Attmts. ● Forged Chuck Jaws ● Lead Screws ● Bearings ● Gears ● Seals ● Boring Bars ● Tool Post Holders ● Tooling ● Scott Index Dividing Head ● PRATT & WHITNEY Rotary Tables to 36” ● SIP Rotary Table ● Dividing Heads ● Chip Conveyors ● Hydraulic & Coolant Pumps ● Verniers ● Micrometers, Height Gages, Standards, Gage Blocks, Pin Gauges, Bore Gauges, Levels, Gear & Beaming Puller & more ● Mill & Lathe Attmts. ● SCHUCO & HEYLIGENSTAEDT Trace Attmts. (A) Cylindrical Grinder EDM, LANSING Machine, Gear Hobber, LANSING Twin Head Turbo Bender Parts & Dbl. End Chamfering Parts ● Automatic Chuck Actuators ● MAN-AU Cycle Parts ● Drive Belts ● Large Quantity of Electrical Fuses, Breakers, Transformers, Wire & Parts ● Pumps ● Motors (A) Box & Layout Tables ● Iron Plates to 2” (A) & (D) SCHERR TUMICO 220 338 Optical Comparators, S/N’s 5492, 140, 14”, 6” x 16” Table (A) JONES & LAMSON 14” Optical Comparator, S/N E 35561 (A)[/expand]

[expand title=”ASSORTED LIFTS & CAR:“]

JLG 40F Boom Lift, S/N NA, Propane Fired, 40’ Lift, 500 Lbs. Cap., Counterweights (A) JLG 27FN Boom Lift, S/N 732246, Propane Fired, 27’ Lift, 500 Lbs. Cap. (A) SNORKELIFT TB50PR Boom Man Lift, S/N 079150, 50 Platform Lift, 30” x 60” Platform, 500 Lbs. Cap., (poor front tire) (A ) CULLEN FRIESTEDT Sheet Lifter, S/N 3408, 10,000 Lbs. Cap., 60” (A) FORD F500 Stakebody Truck w/ Miller Diesel Welder Generator, 600 AMP (C) 1998 LINCOLN Towncar Sedan, VIN 1FNFM82W6WY692916, 74,000 Miles (A) 1982 FORD Escort (no title) (D) EKTO TA Utility Box Trailer (no title) (D)[/expand]

[expand title=”ELECTRON BEAM WELDERS:“]

HAMILTON STANDARD EBW(6) Vacuum Electron Beam Welder, S/N 339, 62”x 62” x 64”, Assembly # 12E-0719700-1, 36KVA, 440V, 3PH, 60CPS, 75-100PSIF, Output 150KV, 40 Milliamp; STOKES 412H-10 Microvac Pump, 300 CFM, 10HP, IMPERIAL Motor Generator Set 10KVA, WELCH 380 Duo Seal Vac Pump, Shuttle Table 30” X 30”, 32” Longitutinal Travel, 30” Cross Travel, (A) SCIAKY VX-50”x 30”x 42” Electron Beam Welder, S/N8608, Chamber 50”x30”x42” 50”x30”x42”, FREDERICKS 7A2-1 Vac Gauge, SCIAKY D-F581 w/NRC521 Tube Thermocouple Gauge, Diffusion Pump-NRCHS 16-10,000 (16”), Roughing Backing Pump – Stokes 212H/140CFM, Holding Pump-WELCH 1403-B, 13.5 CFM, Beam Gun-E-H600 (modified to E-H9600),60KV, X, Y&Z Drive Assemblies disassembled) (A) HAMILTON- ZEISS WO-2&WO-3 Electron Beam Welder (C)[/expand]

[expand title=”MISCELLANEOUS MACHINERY:“]

MORTON Hydraulic Keyseater, S/N 1972, 30” Stroke, 3-1/2” Max Cut Width, 1-13/16” Max Cut Depth, 30”x36” Table, Pit Type (D) PRATT & WHITNEY model A Vertical Slotter, 20” Rotary Table, 6” Stroke, 10” Vertical Adjmt. Longitudinal Travel of Table 25”, Traverse Travel of Table 20”, 33-116SPM, 20” Throat (A) BIGNELL & KEELER Bicycle Rim Maker, 6 Station Roll Former, 8” Centers, Adj. Circular Bender 12-36”, Auto Welder w/Cut-Off, 5 HP vs Drive, 5-3/4” x 1-1/2” Dia Arbors, 2” Arbor Adj., Max Dia. Of RIM 40”, 5 HP (A) (2) PEAR CG6 Dimensional Pantographs S/N’s 4069, 24” x 16” Copy Table, 90° Copy Table Rotation (A) GORTON Pantograph (A) 30” Rotary VS Lapping Table (A) TREBEL SPV260 Balancing Machine, S/N 2957 (A) TOLEDO Pipe Threader (A) SUNNEN Hone (A) CINCINNATI 24” Standard Shaper (D)[/expand]

[expand title=”ELECTRICAL DISCHARGE MACHINES:“]

(2) BRIDGE CM-110DT EDMs, S/N’s 607326 & 610506, 30Amp Power Supply, 19.5”x10” Table, 27”x15.7”x9” Tank,Finishing (A) BRIDGE 11 EDM, (2) 11 V-Pulse Power Supplies (A) CHARMILLES ANDREW EF-630 Wire Feed EDM w/EIA Control, Travels: X-15”, y-15”, 19” Throat, Tank Size 26 Gallons, Wire Size Range ,006”-.014 (A) CINCINNATI Electroject ‘Royal Scotsman’ EDM, md. DL, 14”x10” Platen, 22-1/4” Throat, Tank Size 41”x25”, 165 Gallon Tank (C)[/expand]

[expand title=”COMPRESSORS:“]

WORTHINGTON CAP-15 Centrifugal 400 HP Air Compressor, S/N 969706, 1,475 CFM, 125 PSIG, Oil Free, Inter & Aftercooler (D) KELLOGG-BROOOM VM500 WADE Air Compressor, Twin Pump, 100 HP, S/N H011-1447, 12 & 7.25 Bore, 90-125 PSI, Auto Cut-Off (D) INGERSOLL-RAND SSR-2000 Rotary Screw Air Compressor, 200HP (Rough Cabinet) (A) GARDNER DENVER Electra Screw ES60F Air Compressor S/N 603296 (D) INGERSOLL-RAND Air Compressor, PAC-AIR 100, 100HP, 504 CFM (D) INGERSOLL-RAND T30 Reciprocating Air Compressor, S/N 1414395, 10HP, 3 Stage (D)[/expand]

[expand title=”INCINERATOR & AIR CLEANING EQUIPMENT:“]

ANDERSON 2000 Air Pollution Scrubber (disassembled) • Batch Type Incinerator, Ram Feed w/primary & secondary chambers • (2) Batch Type Incinerators w/ Ram feeds (used for hospital waste) • Test size Gas fired Incinerator approx. 20’ x 30” Dia. •Indirect Gas Fired Test Calciner, Feed & Discharge hoods (INCONEL) (D)

(6) Worthington Multi-Fuel Engine Generator Sets, 1.25 Mw each (7.5 Total Mw), 1,563 KVA, 2400 Volts, 3 Phase, 1,770 HP, Turbocharged Diesel Wothington Engines, md1. SEH-7, S/N’s 1J10-7613 (2-5 J10-7613 & 5J10-7612. Electrical machinery Generator S/N’s VO – 3412, 3413, 3414, 3415, 3416, 3418. Each Generator has a 20 Kw Exciter. (F) (5% BP)

Vulcan Iron Works Model 51106V Hazardous/Non-Hazardous Waste Rotary Kiln Incinerator. 50 Tons Per Day. 25 Million BTU/Hr. Primary Combustion Chamber is a Rotary Kiln12’ Diax 20’ Long, Secondary Combustion Chamber, Venturi Scrubber, Packed Tower & Plume Eliminator Air Pollution Control System, Ram Feeder w/ Guillotine (D) (5% BP)

Shredders Sat urn 52-32 Rotary Shear Shredder, 150 HP (2-75’s) Cutter Thickness 1-1/2”, Hydraulic Drive (D)

Williams 150-3456 Rip Shear Shredder, S/N 18125 (new 1984), Deere 40 Kw Engine, Hopper Feed (D)[/expand]

TERMS: 13% Buyers Premuium on Machinery, 5% Buyers Premium on Real Estate, 7.5MW Generators & Incinerator.