MULTI-MILLION DOLLAR On-Line MACHINERY AUCTION

Bid Opens Sunday, February 12 at 9:00 AM EST (USA)
Bid Closes Friday, February 17 at 4:00 PM EST (USA)

Inspection: Primary Location: 132 54th St., Brooklyn, NY Monday, January 30th
THRU Saturday, February 4th (9 am - 5 pm) February 6th & 7th (10 am - 3 pm)
see bottom for other inspection times & locations

                                       

Bidding & Catalog Available NOW!!!! Click Here

MANUAL LATHES: (2) New LANSING ‘R’ Gap Bed Heavy Duty Lathe, S/N 8035308 & 8034945, 32”/41-3/4” x 120” CC, 4-1/8” Spdl. Bore, Inch/Metric Threading, SS 8-1250 RPM, D1-11 Spdl. Nose, Steady Rest, 39” 4-Jaw Chuck (A) New LANSING G24 Gap Bed Lathe, S/N 11277, 24”/33½” x 160”, 4⅛” Spdl. Bore, D1.8 Spdl. Nose, SS 20-1000 RPM, Inch/Metric Threading, 19” 4-Jaw Chuck (A) New LANSING Gap Bed Engine Lathe, S/N 7934747, 34”/48” x 120”, 4⅛” Spdl. Bore, SS 8-1250 RPM, Inch/Metric Threading, 19½” 4-Jaw Chuck (A) New LANSING G20 Gap Bed Engine Lathe, S/N 24574, 20”/28½” x 120”, 4⅛” Spdl. Bore, D1-8 Spdl. Nose, SS 20-1500 RPM, Inch/Metric Threading, 18” 4-Jaw Chuck (A) New LANSING G24 Gap Bed Engine Lathe, S/N 81276, 24”/35” x 160”, 4½” Spdl. Bore, SS 13-1000 RPM, Inch/Metric Threading, 12” 3-Jaw Chuck (A) New LANSING ‘R’ Gap Bed Heavy Duty Hollow Spindle Lathe, S/N’s 80DLZ5P035, P042 & P041, 24”/36” x 64”, 4-1/16” Spdl. Bore, SS 40-1800 RPM, Inch/Metric Threading, 20” 4-Jaw Chuck (A) LANSING G24 Gap Bed Engine Lathe, S/N 17774, 24”/35” x 220”, 4¼” Spdl. Hole, SS 10-750 RPM, Taper Attmt., Inch/Metric Threading (A) LANSING 24 x 60 Heavy Duty Gap Bed Engine Lathe, 30”/42” x 60”, 4⅛” Spdl. Bore, SS 15-1180 RPM, Inch/Metric Threading, 20” 4-Jaw Chuck (A) TARNOW Gap Bed Engine Lathe, S/N 1418, 24”/34” x 120”, 2” Spdl. Bore, SS 56-1800 RPM, Inch/Metric Threading, 15” 4-Jaw Chuck (A)

SPECIAL LATHES: MAN-AU Cycle Single Point Threading Lathe, Mdl. MP-6, 24” x 48”, 6” Spdl. Bore, SS 30-920 RPM, (A) MX Profilomatic Auto Cycle Duplicating Lathe, Mdl. A, 17” x 30”, 2” Spdl. Bore, Multiple Tools, Used as Demo Model (A)

CNC TURNING, HORIZONTAL & VERTICAL MACHINING CENTERS: ACCUSTAR ST-200 CNC Lathe, (new 1994), 20” x 42”, FANUC O-T Control, 25 HP, Programmable Tailstock, Hydraulic Chuck (A) MITSUBISHI M-H50C CNC Horizontal Machining Center, S/N CH2082, MELDAS CNC Control, Travels: X-28.4”, Y-24.8”, Z-24.8”, Up to 4000 RPM, CAT 50 Taper, 40-Position Tool Changer, Pallet Changer, 20” x 20” Pallets (unit is disassembled) (A) HITACHI SEIKI VA-40 CNC Vertical Machining Center w/ 6 Pallet Changer, S/N VA4528, FANUC 6MB CNC Control, Travels: X-28”, Y-14½”, Z-13½”, SS 28-3150 RPM, NT-50 Taper, 25-Position ATC (A) MATSUURA MC-500V CNC Vertical Machining Center, S/N 81051951, YASNAC 30006 Control, Travels: X-23”, Y-13”, Z-18”, SS 30-6000 RPM, 16-Position ATC (A) BURGMASTER VTC-150 CNC Vertical Machining Center, S/N 214058, FANUC 6MB CNC Control, Travels: X-30”, Y-15”, Z-14”, 20-Position ATC, #40 Taper (A) SUPERCENTER 4 CNC Vertical Machining Center, FANUC 10M CNC Control, Travels: X-31.5”, Y-15.75”, Z-21.65”, SS 40-6000 RPM, 20-Position ATC, CAT 40 Taper, 47.25” x 17.72” Table (A) HITACHI SEIKI 4NE-600 CNC Turning Center, FANUC 5 CNC Control, 22-3/4” Swing, 2” Bar Cap., Travels: X-7.87”, Z-24.4”, 2-3/4” Spdl. Bore, 12-Position Turret, SS 20-3150 RPM (A) MIYANO ANC-45S CNC Turning Center, S/N NR450094, FANUC II TT CNC Control, Live Tooling, Sub-Spdl., C-Axis, Parts Catcher, Tool Setter, 1-3/4 Bar Cap., Travels: X-6-5/16 - 5½”, Z-17-29/32 - 7-7/8”, B-17-5/16”, 20 HP, SS 40-4000 RPM (Main & Sub Spdl.), 12-Position Upper Turret w/ 6 Live Tools, 6-Position Lower Turret, Chip Conveyor (A) LNS FMB Turbo 4000/1700 Hyd. Bar Feed w/ Auto Stacker (A)

MILLS: SUPERMILL AL-76 Horizontal Boring Mill, 3”, 26” Horizontal Travel, 40” Max Ht. Spdl. To Center of Table, 74” Distance Between Spdl. & Outboard Support, 7” Travel of Facing Side, SS 10-158 RPM, 37” Longitudinal Traverse w/ Outboard Support, 44” Auto Cross Travel, 36” x 48” Rotary Table, Outboard Support, Tooling, DRO (A) CINCINNATI #3 Plain Horizontal Mill, S/N 3J3P5D-23, 18” x 72” Table, SS 16-1600 RPM, #50 Taper, 15 HP (A)  CINCINNATI #5 Plain Horizontal Mill, S/N 4J5P5T-10, Mdl. 530-20, 20” x 94” Table, Travels: X-50”, Y-16”, Z-20”, SS 14-1400, #50 Taper Vertical Head Attmt. (A) VAN NORMAN 22L Universal Mill, S/N 22L-7253, 45” x 10” Table, Travels: X-28”, Y-10”, Z-17”, #50 Taper, SS 50-1400 RPM, 90º Vertical Head (A) VAN NORMAN 26L Plain Mill, S/N 36125, 58” x 13” Table, Travels: X-28”, Y-12”, Z-19”, SS 30-1500 RPM (D) K & T MILWAUKEE 205SA Horizontal Mill, S/N 9190-8, 12” x 50” Table, SS 25-1500 RPM, Travels: X-28”, Y-10”, Z-18”, Power Feeds (A) CINCINNATI No. 5HP Horizontal Mill w/ Vertical Head Attmt., S/N 8A5PIK-14, 72” x 21” Table, Travels: X-48”, Y-14”, Z-16”, #50 Taper, SS 16-443 RPM (D) EKSTROM CARLSON 540 Universal Routermill, S/N 540-111, 18” x 48” Table, 31” Throat, SS 160-5000 RPM (A) BRIDGEPORT ‘J’ Head Vertical Mill, S/N 60608, 9” x 42” PF Table, 1 HP, SS 80-2700 RPM (C) BRIDGEPORT Roundover Arm Vertical Mill, S/N 9712, 9” x 42” Table, ½” HP (C) MSC VS Vertical Mill, 10” X 50” PF Table, 2 HP, SS 70-3600 RPM, R8 & 40 Taper (A) ROCHAUD FH-108 Production Mills, S/N 52038 & 35, 5” x 14” Table, 1 HP (A) SUPERMILL EHD Vertical Mill, 9” x 42” PF Table, SS-80-2800 RPM, R8 Taper (A)

ROTARY SUR FACE GRINDERS: New LANSING 72 Rotary Surface Grinder, 72” Swing, 70” Dia. Of Workpiece, 72” Table, 40” 14 Segment Wheel, 100 HP, 20” Vertical Travel, 16” Ht. of Workpiece (A) New LANSING 56 Rotary Surface Grinder, 56” Swing, 47” dia. Of Workpiece, 16” Ht of Workpiece, 50” Table, 17.7” Vertical Travel, 50 HP, 25” 10 Segment Wheel (A) New LANSING 38 Rotary Surface Grinder, 38” Swing, 32” Dia. Of Workpiece, 14” Ht. of Workpiece, 32” Table, 16” Vertical Travel, 17” 8 Segment Wheel, 40 HP (A)

UNIVERSAL CYLINDRICAL & PLAIN GRINDERS: New ELGIN TITAN Hydraulic Universal Cylindrical Grinder, 14” x 60”, #4 MT, Steady Rests, Foot Stocks, (2) Internal Grinding Spdls., Wheel Dresser, (A) New LANSING 13A Hydraulic Cylindrical Universal Grinder, 13” x60”, Balancing Arbor & Stand, Internal Grinding Spdls., (A) New RIBON RUR - 1000 Universal Cylindrical

CENTERLESS GRINDERS: New LANSING M65-DI Precision Centerless Grinder, S/N 82278, Hydrodynamic Grinding Wheel Spdl., .008 - 1.125” Grinding Cap., Hydraulic Pump, 2½” x 12” x 5” Grinding Wheel, 2½” x 7” x 3” Regulating Wheel (A) CINCINNATI #4 Centerless Grinder, S/N 3M4HIY-10, Thru Feed Work Rest 2½” - 7½”, 24” x 12” Max Grinding Wheel, Wheel Truing Device, Hydraulic Pump, Wheel Truing Attmt. (A)
 

SURFACE GRINDERS: ELGIN ALPHA RTL700 High Speed Surface Grinders, S/N 32381 & 32380 & 27718, 20” x 28” Electro-Magnetic Chuck, 16” Wheel Dia., Hydraulic & Coolant Pumps (A) BLOHM HFS-12 Hydraulic Surface Grinder, S/N 77645, 12” x 48” Electro-Magnetic Chuck, 16” Grinding Wheel Dia. (A) BLOHM 12” x 28” Simplex Hydraulic Surface Grinder, S/N 0350, 12” Wheel Dia. (A) ELB SCHIFF 14” x 36” Hydraulic Surface Grinder, 12” Wheel Dia., Hyd. Table Feed (A) HITACHI GHL-300S9 Hydraulic Surface Grinder, S/N 715273-3, 12” x 36” Magnetic Chuck (A) COVEL Surface Grinder, S/N 10-1103, 6” x 18” Magnetic Chuck, 6” Wheel Dia. (A) DoALL D6-1 Hydraulic Surface Grinder, S/N GI-45294, 6” x 18” Permanent Magnetic Chuck (A)

MISCELLANEOUS GRINDERS: HEALD No. 70-A Internal Grinder, S/N 12101, RED HEAD Internal Spdl., 66” X 12” Table, 1¼” Hole Thru Spdl. (A) 35 HP Vertical Spdl. For Rotary Surface Grinder (Blanchard Type) (A) EXCELLLO & CARBALOY Dbl. End Tool Grinders, 14” Wheel Dia., 9” x 22” Table (A & D) KLING 10” DE GRINDER (D)

PRESSES: (2) New LANSING KDC-110 Gap Frame Presses, 110 Ton, 5⅝” Stroke, 50 SPM, 16” Shut Ht., 3⅝” Ram Adjmt., 19⅝” Daylight, 27¼” x 44” Bed, Air Clutch, Air Die Cushion, Lube System, Counter (A) CINCINNATI 300 Ton Hydroform Press, S/N 61-300-F-336-2, 8” Blank Dia., 7” Punch Dia., 7” Draw Depth, 12,000 Cycles/Hr., 8” Stroke, 11½” Daylight, 18” x 15” LRFB Bolster, Lot of Blanks (A) VULCAN CM 220 Eccentric OBI Press, S/N 270-666, 125 Ton, Air Clutch, 50 SPM Adj. Stroke 5⅞” - 8½”, Sgl. Back Gear, 13⅝” Shut Ht., 43½” x 27” Bolster LRFB (A) ERIE 100 Ton Hydraulic Press, S/N P1165, 48” x 60” Bed, 48” Stroke, 50” Daylight (B) BLISS Mdl. 25AN Horn Press, 25 Ton, Shut Height 8 - 20”, 12” - 20” FBLR Bed, Rolling Key Clutch (A) PRESS RITE #2 OBI Press, S/N 4273, 15 Ton, 90 SPM, 11½” x 18” FBLR Bed, 2” Stroke, 7” Shut Ht. (A) GENERAL MFG. No. 106 Power Press (A) KR WILSON MWMD-25-3 Hydraulic Straightening Press, S/N 2020, 25 Ton, 10” Stroke, 15” x 8” Table (A)

DRILLS: CINCINNATI BICKFORD Super Service Radial Arm Drill, S/N 6E378, 22” Column x 9’ Arm, 81” Max Drilling Radius 81”, 84” Head Travel on Arm, 72” Vertical Head Travel, #6 MT, SS 8-1000 RPM, 15’ Travel on Base, Hydraulic Clamping, Power Elevation (B) CARIMATI GT440/1000 Radial Arm Drill, S/N 87320, 9” Column x 40” Arm, 28” Head Travel on Arm, 26½” Head Travel on Column, 10” Spdl. Travel, #4 MT, SS 45-1600 RPM, 28” x 21” Table, T-Slotted Base (A) SPEEDMASTER Omniversal Portable Radial Arm Drill, Center of Spdl. to Column 35”, Spdl. Nose to Base Plate 34.5”, #3 MT, SS- 50-1000 RPM, 5.5” Spdl. Travel, Max Horizontal Travel of Head 22”, 360º Swivel of Drilling Head, Y- Travel of Arm 34.5” (A) (2) SPEEDMASTER (EDELSTAAL) DC 50 Heavy Duty Geared Head Column Drills, 25”, 2” Cap., Max Distance Spdl. To Table 29½”, Max Distance Spdl. to Base 47”, 21” x 17” Table, SS 47½ -2120 RPM (A) SPEEDMASTER (EDESTAAL) DC 63 Heavy Duty Geared Head Column Drill, 28”, 2½” Cap., 25” x 20” Table, SS 37½ -1700 RPM (A) DEFIANCE 3A HD Drill Press, SS 25-500 RPM, #5 MT, 24” x 24” Table (D) TOLEDO 4-Spdl. Drill Press, S/N 11898, 25”, 31” x 83” Table, #2 Taper, SS 617-3420 RPM (C) AVEY 2-Head Drill Press (D) DELTA 17” Pedestal Drill Press, S/N 36-6533 (A)

MISCELLANEOUS FABRICATION MACHINERY: New LANSING IW-55A Ironworker, S/N 52524, Punching 55 Tons, 8⅝” Throat, 4” Cap., 1¾” Max Stroke, 1⅝” Dia. X 1⅜” Thickness, 3/4” x 3/4” Max Cap.; Flat Bar Shear - 14” x 7/16”, 14¼” Blade Length, 8” x 3/4”; Angle Shear at 90º4” x 4” x ½”; Bar Shear - Rd. 1¼”, Sq. Bar 1¼” x 1¼”, Channel 4” x 2”; Notching - 2” x 3½” x 3/8”, ‘V’ 2½” x 3/8”, Brake Tooling & Asst. Attmts. (A) WYSONG 1010 Power Squaring Shear, S/N P32-2004, w/ Computerized Back Gauge Control, 10’ x 3/16” (A) DRIES & KRUMP #165 Power Apron Brake, S/N 66396, 73” X 3/16” Cap., Geared (A) KAUFMAN Rolling Mill (A) STRIPPIT Fabricator, S/N 947 (A) NIAGARA No. 3 Hand Shear, 11” (A) ATLAS #4 Compound Mandrel Press, Ratchet Type (A) MARSHALLTOWN 10M Circle (Throatless) Shear, S/N 4723, 10 Ga., 9” Radius, 4” Circle Blade (A) GRANT No. 5A Hammer, S/N 5A88 (A) NIAGARA Manual Ironworker/Shear (C) DIACRO 24” Bar Folder, S/N L2155 (C) ALPHIL Spot Welder, S/N 3999, 40 KVA, 18” THROAT (A) MITUTOYO BHJ1020 CMM, S/N IKG217, RENISHAW PH 9 Probe (G) DELTA ROCKWELL 6” Vertical Belt Sander (A)

FURNACES & OVENS: (2) ABAR IBSEN Vacuum Annealing Furnace, Mdl. VFC., S/N 59226, 150 KW Output, 72” Door Opening, Working Area 41” x 63” x 36”, STOKES 615-MVR Pump, S/N 873410E1201, HONEYWELL Digital Control Programmer, Temp. Control & Recorder (A&C) GEHNRICH & GEHNRICH Gas Oven, S/N 1855, F/R Doors, 77” x 120” x 106”, Temp. to 550º (C) LYDON BROTHERS Electric Curing Oven, 36” x 32” x 32”, Temp. to 500º, Chart Recorder (A) ALPINE EF-3 Electric Heat Treating Oven, S/N 127, 2500º Temp., 18” x 18” x 19”, 440 V, 3 PH (C) THELCO 31479A Welding Rod Oven, S/N 1SA-D-8, 900 W, 230 V, 1 PH (D) (2) PHOENIX Mdl. 16 Dry Rod Ovens, 100º - 500º, 1000 W (D)

PRINTING & PROCESSING: SUPER JJ 2024 2/Color Offset Sheet Fed Printing Press, 28” x 40”, Dampening, 10,000 SPH, Sheet Cap. .04 -.8mm (.000157 x .0314”) Sheet  Thickness, Plate Size 31.50” x 40.55” (800 x 1030 x .3mm), Blanket Size 34.65” x 40.94” (880 x 1040 x 1.8mm), Pile Feed (A) LANSING QS-02B Auto Three-Knife Trimmer, Max Cutting Size 10.24” x 14.52” (260 x 370mm), 3.93” (100mm) Cutting Ht., 7-21 CPM (A) FARREL SI-DG High Speed Herring Bone Gear Unit, S/N KD6214, 2325-16,955 RPM, Ratio 1:7.293, 2700 HP, 240V, 5000 W, 50º -250º, Catalog # MTO-37XX (A) MAG-1 440-FDR802066 Motor AC Synchronous Generator Set, S/N IRL-3241366, 3 PH, 1800 RPM, 125 KW, 156 KVA, CUMMINS MH250 Diesel Engine, 350 HP (D) DELAVAL Centrifuge Separator, Type PX207-295-60, S/N 2865816, Tachometer to 1800 RPM, 7½ HP (A) CATERPILLAR SR-4 Motor Generator Set, S/N 5EA04064, 3306 CAT Diesel Engine, S/N 85Z02453, 200 KW, 250 KVA, 60 Cycle, 3 PH, 480V, Exciter 20V, no fuel tank (D) CATERPILLAR 9304 Generator, CAT 3304 Engine, S/N 5CAD0988, 105 Kw, 131 KVA (E) REEVES Drives (A) GE Machine Tool 250 HP Drive System (A) 2003 GENERAL ELECTRIC Digital X-Ray System w/DXR-500 Acquisition System, Revolution (TM) Detector Panel w/ Controller, Temp Control System, PC, GE Remote Image Review Station (C) Stainless Steel Dryer Liner (non-magnetic), 25’2” Long, 80” Dia., 24 Counter clockwise spiral flights & 14 Rows of 5 Angle Filters. (D)

ELECTRON BEAM WELDERS: HAMILTON STANDARD EBW(6) Vacuum Electron Beam Welder, S/N 339, 62”x 62” x 64”, Assembly # 12E-0719700-1, 36KVA, 440V, 3PH, 60CPS, 75-100PSIF, Output 150KV, 40 Milliamp; STOKES 412H-10 Microvac Pump, 300 CFM, 10HP, IMPERIAL Motor Generator Set 10KVA, WELCH 380 Duo Seal Vac Pump, Shuttle Table 30” X 30”, 32” Longitutinal Travel, 30” Cross Travel, (A) SCIAKY VX-50”x 30”x 42” Electron Beam Welder, S/N8608, Chamber 50”x30”x42” 50”x30”x42”, FREDERICKS 7A2-1 Vac Gauge, SCIAKY D-F581 w/NRC521 Tube Thermocouple Gauge, Diffusion Pump-NRCHS 16-10,000 (16”), Roughing Backing Pump - Stokes 212H/140CFM, Holding Pump-WELCH 1403-B, 13.5 CFM, Beam Gun-E-H600 (modified to E-H9600),60KV, X, Y&Z Drive Assemblies disassembled) (A) HAMILTON- ZEISS WO-2&WO-3 Electron Beam Welder (C)

MISCELLANEOUS MACHINERY: MORTON Hydraulic Keyseater, S/N 1972, 30” Stroke, 3-1/2” Max Cut Width, 1-13/16” Max Cut Depth, 30”x36” Table, Pit Type (D) PRATT & WHITNEY model A Vertical Slotter, 20” Rotary Table, 6” Stroke, 10” Vertical Adjmt. Longitudinal Travel of Table 25”, Traverse Travel of Table 20”, 33-116SPM, 20” Throat (A) BIGNELL & KEELER Bicycle Rim Maker, 6 Station Roll Former, 8” Centers, Adj. Circular Bender 12-36”, Auto Welder w/Cut-Off, 5 HP vs Drive, 5-3/4” x 1-1/2” Dia Arbors, 2” Arbor Adj., Max Dia. Of RIM 40”, 5 HP (A) (2) PEAR CG6 Dimensional Pantographs S/N’s 4069, 24” x 16” Copy Table, 90° Copy Table Rotation (A) GORTON Pantograph (A) 30” Rotary VS Lapping Table (A) TREBEL SPV260 Balancing Machine, S/N 2957 (A) TOLEDO Pipe Threader (A) SUNNEN Hone (A) CINCINNATI 24” Standard Shaper (D)

ELECTRICAL DISCHARGE MACHINES: (2) BRIDGE CM-110DT EDMs, S/N’s 607326 & 610506, 30Amp Power Supply, 19.5”x10” Table, 27”x15.7”x9” Tank,Finishing (A) BRIDGE 11 EDM, (2) 11 V-Pulse Power Supplies (A) CHARMILLES ANDREW EF-630 Wire Feed EDM w/EIA Control, Travels: X-15”, y-15”, 19” Throat, Tank Size 26 Gallons, Wire Size Range ,006”-.014 (A) CINCINNATI Electroject ‘Royal Scotsman’ EDM, md. DL, 14”x10” Platen, 22-1/4” Throat, Tank Size 41”x25”, 165 Gallon Tank (C)

COMPRESSORS: WORTHINGTON CAP-15 Centrifugal 400 HP Air Compressor, S/N 969706, 1,475 CFM, 125 PSIG, Oil Free, Inter & Aftercooler (D) KELLOGG-BROOOM VM500 WADE Air Compressor, Twin Pump, 100 HP, S/N H011-1447, 12 & 7.25 Bore, 90-125 PSI, Auto Cut-Off (D) INGERSOLL-RAND SSR-2000 Rotary Screw Air Compressor, 200HP (Rough Cabinet) (A) GARDNER DENVER Electra Screw ES60F Air Compressor S/N 603296 (D) INGERSOLL-RAND Air Compressor, PAC-AIR 100, 100HP, 504 CFM (D) INGERSOLL-RAND T30 Reciprocating Air Compressor, S/N 1414395, 10HP, 3 Stage (D)

INCINERATOR & AIR CLEANING EQUIPMENT: ANDERSON 2000 Air Pollution Scrubber (disassembled) • Batch Type Incinerator, Ram Feed w/primary & secondary chambers • (2) Batch Type Incinerators w/ Ram feeds (used for hospital waste) • Test size Gas fired Incinerator approx. 20’ x 30” Dia. •Indirect Gas Fired Test Calciner, Feed & Discharge hoods (INCONEL) (D)

Test